To Next PageTo Next Page
Need help?Do you have a question about the Chamberlain 3255 and is the answer not in the manual?
General| Horsepower | 1/2 HP |
|---|---|
| Drive System | Chain Drive |
| Voltage | 120V |
| Safety and Security | Rolling Code Technology |
| Battery Backup | No |
Lists necessary hand tools for assembly and installation of the garage door opener.
Lists all hardware components included in the installation hardware bag.
Crucial safety guidelines and instructions before starting installation.
Instructions for mounting the header bracket on the wall structure.
Instructions for mounting the header bracket on the ceiling structure.
Specific positioning steps for sectional or track-equipped doors.
Specific positioning steps for one-piece doors without a track.
Details for making a permanent electrical connection to the opener.
Key information regarding the safety reversing sensor installation and function.
Details bracket installation for track, wall, and floor mounting.
Covers sensor mounting, wiring, and alignment procedures.
Addresses common problems encountered during safety sensor alignment.
Provides solutions for common safety sensor errors and malfunctions.
Detailed steps for correctly aligning the safety reversing sensors.
Specific instructions for fastening the door bracket on sectional doors.
Specific instructions for fastening the door bracket on one-piece doors.
Instructions for fastening the door bracket on metal doors.
Instructions for fastening the door bracket on wood doors.
Specific steps for connecting the door arm to the trolley on sectional doors.
Steps to assemble the door arm for one-piece doors.
Procedures for adjusting travel limits for one-piece doors before connecting arm.
Guidance on adjusting travel limits based on door travel behavior.
Guidance on adjusting UP and DOWN force settings based on door behavior.
Critical safety instructions for operating the garage door opener.
How to operate the opener with remote, wall control, and sensor behavior.
Details on the functions of the multi-function door control, including light and lock features.
Guidance on adjusting limits and force settings due to weather or operation.
Recommended maintenance tasks for the opener, including monthly, twice-yearly, and yearly checks.
Troubleshooting steps for the door not closing with blinking lights.
Troubleshooting steps when remotes fail to activate the opener.
Troubleshooting steps for unexpected door reversals during operation.
Troubleshooting steps for door reversals after reaching the fully closed position.
Explains the security light feature and how it functions.
Troubleshooting steps for a motor unit that hums briefly.
Diagnoses issues related to safety reversing sensors being open, disconnected, or wired incorrectly.
Diagnoses issues related to door control or wire shorts.
Diagnoses issues related to misaligned or dim safety reversing sensors.
Diagnoses issues related to motor overheating or RPM sensor failure.
Diagnoses issues related to motor circuit failure or logic board issues.
Instructions for programming remote controls to the garage door opener.
Steps to erase all previously programmed remote control codes.
Information on programming additional buttons on 3-button remotes.
Procedure to change the existing PIN for Keyless Entry.
Procedure to set up a temporary PIN for visitors or service personnel.
Lists and illustrates parts for the rail assembly.
Lists and illustrates common installation components.
