EasyManuals Logo

Chamberlain HD920EV User Manual

Chamberlain HD920EV
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
15
Installation
STEP 6 Install the light bulbs
To preventpossible OVERHEATING of the end panel or lightsocket:
Use ONLY A19 incandescent (100W maximum) or compact fluorescent (26W maximum) light
bulbs.
DO NOT use incandescent bulbs larger than 100W.
DO NOT use compact fluorescent lightbulbs larger than 26W (100W) equivalent.
DO NOT use halogen bulbs.
DO NOT use short neck or specialty light bulbs.
1. Pull on the top sides ofthe light lens and rotate the lightlensdown.
2. Insert an A19 incandescent (100W maximum) or compact fluorescent (26W, 100W equivalent)
lightbulb into the lightsocket.
3. Rotate the lensup to close.
NOTE: Do not use halogen, short neck, or specialty light bulbs as these may overheat the end panel or
light socket. Do not use LED bulbs as they may reduce the range or performance of your remote controls.
or
or
STEP 7 Attach the emergency release rope and handle
To preventpossible SERIOUS INJURY or DEATH from a falling garage door:
If possible, use emergency release handle to disengage trolley ONLY when garage door is
CLOSED. Weak or broken springs or unbalanced door could result in an open door falling rapidly
and/or unexpectedly.
NEVER use emergency release handle unless garage doorwayis clear of persons and
obstructions.
NEVER use handle to pull door open or closed.Ifrope knotbecomesuntied,you could fall.
1. Insert one end of the emergencyrelease rope through the handle. Make sure that“NOTICE is
rightside up. Tie a knot atleast1 inch (2.5 cm) from the end of the emergencyrelease rope.
2. Insert the other end of the emergency release rope through the hole in the trolley release arm.
Mount the emergencyrelease within reach, but at least6 feet (1.83 m) above floor, avoiding
contactwith vehicles to prevent accidental release and secure with a knot.
NOTE: If it is necessary to cut the emergency release rope, seal the cut end with a match or lighter to
prevent unraveling. Ensure the emergency release rope and handle are above the top of all vehicles to
avoid entanglement.
NOTICE

Other manuals for Chamberlain HD920EV

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chamberlain HD920EV and is the answer not in the manual?

Chamberlain HD920EV Specifications

General IconGeneral
BrandChamberlain
ModelHD920EV
CategoryGarage Door Opener
LanguageEnglish

Related product manuals