EasyManua.ls Logo

Chamberlain LiftMaster Security+ 1245LMC-R-1/3HP User Manual

Chamberlain LiftMaster Security+ 1245LMC-R-1/3HP
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196
www.liftmaster.com
GARAGE DOOR OPENER
Models 1255LMC-R – 1/2HP
1245LMC-R – 1/3HP
For Residential Use Only
Owner’s Manual
Please read this manual and the enclosed safety materials carefully!
Fasten the manual near the garage door after installation.
The door WILL NOT CLOSE unless the Protector System
®
is connected and
properly aligned.
Periodic checks of the opener are required to ensure safe operation.
The model number label is located on the front panel of your opener.
®

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Chamberlain LiftMaster Security+ 1245LMC-R-1/3HP and is the answer not in the manual?

Chamberlain LiftMaster Security+ 1245LMC-R-1/3HP Specifications

General IconGeneral
TypeChain Drive
Power1/3 HP
Drive TypeChain
Max Door Height7 ft
Remote ControlYes
Number of Remote Controls Included1
Battery BackupNo
Security FeaturesSecurity+ 2.0
Warranty1 Year
Works WithMyQ

Summary

Introduction to Garage Door Opener Safety

Safety Symbols and Signal Words

Explains manual symbols and signal words for hazard identification.

Preparing Your Garage Door for Installation

Assembly Step 1: Attach Rail to Motor Unit

Secure Rail to Motor Unit

Guides on attaching the opener rail to the motor unit using specified hardware.

Assembly Step 2: Chain and Sprocket Installation

Attach Chain to Sprocket and Install Cover

Instructions for attaching the drive chain to the sprocket and installing the protective cover.

Assembly Step 3: Tighten Chain

Important Installation Safety Instructions

Key Warnings Before and During Installation

Crucial safety warnings and general instructions to follow before and during opener installation.

Installation Step 1: Determine Header Bracket Location

Installation Step 2: Install Header Bracket

Installation Step 3: Attach Rail to Header Bracket

Installation Step 4: Position Opener Unit

Installation Step 5: Hang Opener Unit

Installation Step 6: Install Door Control

Installation Step 8: Attach Emergency Release

Connect Emergency Release Rope and Handle

Instructions for attaching the emergency release rope and handle to the trolley.

Installation Step 9: Electrical Requirements

Wiring and Grounding for Opener Power

Details on electrical requirements, grounding, and permanent wiring connections for the opener.

Installation Step 10: Install Safety Reversing Sensors

Mount and Align Protector System® Sensors

Explains how to install and align the safety reversing sensors for safe door operation.

Installing Safety Sensor Brackets

Mounting and Wiring Safety Sensors

Installation Step 11: Fasten Door Bracket

One-Piece Door Bracket Installation

Installation Step 12: Connect Door Arm to Trolley

One-Piece Door Arm Connection

Adjustment Step 1: Travel Limits

Set UP and DOWN Travel Limits

Instructions on how to adjust travel limit screws for proper door stopping points.

Adjustment Step 2: Force Adjustment

Adjust Opening and Closing Force Settings

Guides on adjusting force controls for correct door movement without excessive force.

Adjustment Step 3: Test Safety Reversal System

Verify Safety Reversal System Functionality

Procedures for testing the safety reversal system using an obstruction test.

Adjustment Step 4: Test Protector System®

Test Safety Reversing Sensor Operation

Instructions for testing the Protector System® to ensure safety sensors are working.

Operation Safety Instructions

Key Safety Guidelines for Opener Use

Critical safety guidelines to follow when operating the garage door opener and its remote.

Manual Door Operation Procedure

Disengage Trolley for Manual Door Opening

Procedures for manually opening or closing the garage door using the emergency release handle.

Opener Care and Maintenance Schedule

Troubleshooting Common Opener Problems

Diagnostic Chart and Error Codes

Programming Your Garage Door Opener

Keyless Entry PIN Management

Related product manuals