EasyManua.ls Logo

Chamberlain LiftMaster Security+ 1256R User Manual

Chamberlain LiftMaster Security+ 1256R
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CHAMBERLAIN ®
LiftM
I'] i;IKo] [o] I_mi'±_l I
GARAGE
The Chamberlain Group, Inc.
845 Larch Avenue
EImhurst, Illinois 60126-1196
www.liftmaster.com
0( us
®
DOOR OPENER
Model Series 1200
For Residential Use Only
Q ®
LiftMaster
Model 1256R- I/2HP
Model 1246R- I/3HP
]
Model 1255R - I/2HP
Model 1245R - I/3HP
_00000_
Model 1240R - 1/4HP
Owner's Manual
Please read this manual and the enclosed safety materials carefully!
Fasten the manual near the garage door after installation.
The door WILL NOT CLOSE unless the Protector System ® is connected and
properly aligned.
Periodic checks of the opener are required to ensure safe operation.
The model number label is located on the front panel of your opener.
Question and Answer IconNeed help?

Do you have a question about the Chamberlain LiftMaster Security+ 1256R and is the answer not in the manual?

Chamberlain LiftMaster Security+ 1256R Specifications

General IconGeneral
BrandChamberlain
ModelLiftMaster Security+ 1256R
CategoryGarage Door Opener
LanguageEnglish

Summary

Introduction

Safety Symbols and Signal Words

Explains safety symbols and signal words used in the manual.

Preparing Your Garage Door

Tools Required

Lists the required tools for assembly and installation.

Planning Your Installation

Sectional Door Installation

Details considerations for sectional garage doors.

One-Piece Door Installation

Details considerations for one-piece garage doors.

Carton Inventory

Hardware Inventory

Assembly: Fasten Rail to Motor Unit

Assembly: Attach Chain Spreader

Assembly: Tighten the Chain

Installation: Determine Header Bracket Location

Sectional & Tracked One-Piece Door Bracket Location

Instructions for locating the header bracket for specific door types.

One-Piece Door Without Track Bracket Location

Instructions for locating the header bracket for one-piece doors without tracks.

Installation: Install Header Bracket

Wall Header Bracket Installation

Steps for mounting the header bracket on a wall.

Ceiling Header Bracket Installation

Steps for mounting the header bracket on a ceiling.

Installation: Attach Rail to Header Bracket

Installation: Position the Opener

Sectional & Tracked One-Piece Door Opener Positioning

Guidance on positioning the opener for tracked doors.

One-Piece Door Without Track Opener Positioning

Guidance on positioning the opener for untracked one-piece doors.

Installation: Hang the Opener

Installation: Install Door Control

Installation: Install Light and Lens

Installation: Attach Emergency Release Rope and Handle

Installation: Electrical Requirements

Installation: Install Protector System®

Safety Reversing Sensor Information

Details on the safety reversing sensor's function and installation.

Installing Safety Sensor Brackets

Garage Door Track Sensor Bracket Installation

Mounting sensors on garage door tracks.

Wall Sensor Bracket Installation

Mounting sensors on the garage wall.

Floor Sensor Bracket Installation

Mounting sensors on the garage floor.

Mounting and Wiring Safety Sensors

Aligning Safety Sensors

Procedures for aligning the safety sensors correctly.

Installation: Fasten Door Bracket

Sectional Doors Bracket Fastening

How to fasten the door bracket to sectional doors.

One-Piece Doors Bracket Fastening

How to fasten the door bracket to one-piece doors.

Installation: Connect Door Arm to Trolley

Sectional Doors Arm to Trolley Connection

Connecting the door arm to the trolley for sectional doors.

One-Piece Doors Arm to Trolley Connection

Connecting the door arm to the trolley for one-piece doors.

Adjustment: Adjust Travel Limits

Adjustment: Adjust Force

Adjustment: Test Safety Reversal System

Adjustment: Test Protector System®

Opener Operation

Using Wall-Mounted Door Control

Manually Open Door

Opener Care and Maintenance

Limit and Force Adjustments

Adjusting limits and force for optimal performance.

Maintenance Schedule

Recommended maintenance tasks and frequency.

Troubleshooting Common Problems

Programming Your Opener

Add or Reprogram Remote Control

Steps to add or reprogram remote controls.

Erase All Remote Codes

How to erase all stored remote control codes.

Manage Keyless Entry PIN

Repair Parts

Rail Assembly Parts

List of parts for the rail assembly.

Installation Parts

List of parts included in the installation kit.

Motor Unit Assembly Parts

Available Accessories

Liftmaster Service Contact

How to Order Repair Parts

Limited Warranty Information

Related product manuals