Chamberlain MyQ Smart Garage Hub User Manual

Method 3: Using Bluetooth (iPhone users only)
1. Plug in the MyQ Smart Garage Hub. The Blue LED blinks.
Note: If the LED is not blinking blue, follow the instructions on Reset or change wireless information on a MyQ
Smart Garage Hub.
2. Connect the Apple® mobile device to the Wi-Fi network.
3. On the Apple® mobile device, go to Settings > Bluetooth, and turn on Bluetooth.
4. Find the Bluetooth MyQ-nnn device and select MyQ-nnn device to pair. The nnn is the last 3 digits of the MyQ
Smart Garage Hub’s serial number.
Note: If the phone believes the Hub is not connected to the internet, try forgetting the device before pairing. To do
this, select the blue information icon to the right of the device name and select forget this device. The MyQ-nnn
device reappears for pairing in few seconds.
5. When prompted, allow phone to share Wi-Fi network settings with the MyQ Smart Garage Hub (this may take a
minute). When the LED light turns green the device has successfully connected to the Wi-Fi network.
Important: Do not choose to install the LiftMaster iPhone application.
LED indicators
LED color and state MyQ Smart Garage Hub status
Wi-Fi needs to be set up
No router communication
Wi-Fi setup active
Communicating with router
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Garage/LiftMaster_MyQ_Smart_Garage_Hub/LiftM…
Updated: Tue, 05 Jan 2021 16:24:44 GMT
8

Chamberlain MyQ Smart Garage Hub Specifications

General

Compatibility	Most garage door openers manufactured after 1993
Connectivity	Wi-Fi
Control	Smartphone app
Brand	Chamberlain
Model	MYQ-G0301
Remote Control	No
Requires Hub	No
Voice Control	Google Assistant
Power Source	Plug-in
Notifications	Real-time alerts