ChamSys QuickQ Series User Manual

www.chamsys.co.uk QuickQ User Manual
Page 28 of 43
Chase Direction
Chases direction can be modified from the cue list window using the buttons in the top right of the screen.
The options are:
 Backward
 Forward
 Bounce
 Random
Chase Speed - Tap to Time, Speed and Crossfader
 Tap to time - use this button, two taps or more, to tap to time of the music playing and the speed of the
chase will be adjusted to the beat of the music. This can be used and reused to adjust a chase to the
speed of music changed live.
 Speed - Use this encode to modify the speed of the chase without using tap to time. The encoder tab can
also be “pulled out” and the speed can be multiplied or divided using buttons on the tab.
 Crossfade - can be set between a full fade between steps (default) or a snap between steps.
 Fine - fine control of encoder actions.
Reorder Cues in a Chase
 Cues in a chase can be reordered and moved by selecting the 6 dots symbol by holding and then dragging
the cue to a new location in the list. The cues will be renumbered to reflect the move.
 While a chase is running it is possible to go to a specific cue on command. Drag the arrow selection out
and then press the (goto this cue) button.

ChamSys QuickQ Series Specifications

General

Ethernet Ports	1
USB Ports	2
Motorized Faders	No
MIDI I/O	Yes
Built-in Effects	Yes
DMX Channels	512
Universes	1
Screen	Touchscreen
Physical DMX Outputs	1
Software	QuickQ Software