100-00-6 Overview 100-00-6
Description and Operation (Continued)
Air-conditioning Cooling Agent
See Section Chemical Substance.
Inflammable substance—observance of the
non-smoking regulation
Frostbite can be caused when the cooling agent is
contacted with skin.
The manufacturer’s guidance must be strictly
observed. The protective gloves and glasses can
avoid the strong light exposure.
If the cooling agent is inadvertently contacted with
skins or eyes, please wash with water immediately.
The suitable cleaning agent should be used to wash
if the cooling agent is split into the eyes, never rub
your eyes. Seek medical assistance if necessary
Air-conditioning Cooling Agent—forbidden
items
– It is forbidden to expose the air-conditioning
cooling agent under sunshine or heat the
air-conditioning cooling agent.
– When the cooling agent is filled, never position
the filling bottle vertically, and the filling
opening should be positioned downwards.
– Prevent the frostiness on the air-conditioning
cooling agent bottle.
– Prevent the dropping of the air-conditioning
cooling agent bottle.
– It is forbidden to vent the air-conditioning
cooling agent under any circumstances.
– It is forbidden to use the cooling agent in a
mixing way, such as fluorine R12 and R134a.
Sealing Agent and Adhesive Agent
See Chapter Inflammable Chemical Substance.
Inflammable Substance--observance of the
non-smoking regulation.
In general, the sealing agent and the adhesive agent
should be placed in the non-smoking area and must
be preserved cleanly, for example, put the sealing
agent and the adhesive agent on the storage rack
covered by disposable paper towel, it is advisable
that the sealing agent and the adhesive agent are
taken out of the package boxes to position them
separately; the package boxes include subpackage
boxes on which corresponding labels should be
applied.
For melting and sealing agents and adhesive
agent, see Section Melting Agent
Follow the instruction book of the manufacturer.
Water Soluble Sealing Agent and Adhesive
Agent
The water soluble viscose glue based on
macromolecule emulsion and latex may contain
small amount of volatile toxic substances and
chemicals harmful for human body. Avoid making
the substances contact with eyes and skins, please
make sure good ventilation when the water soluble
viscose glue is used.
Hot Melt Viscose
The solid hot melt viscose is safe. Under the molten
state, the hot melt viscose can be burnt and will
release harmful gases, therefore being harmful to
health.
Wear suitable protective working overalls, use a
constant temperature heater with self-deenergizing
function, and enough air drafting equipments
should be provided.
Resin Sealing Agent and Adhesive Agent, such
as Epoxide and Formaldehyde Resin
The adhesive agent should be mixed in the places
of good ventilation because harmful or toxic
volatile substances will be released during mixing.
Dermatitis can be caused when the skin contacts
with the tacky resin and hardening agent, some
harmful and toxic chemical substances will be
absorbed by skin.
The spatters can injure eyes.
Keep good ventilation and avoid contacting with
skins and eyes.
Anaerobic Cyan Acrylate Adhesive and Acrylic
Acid Adhesive
Most of the adhesive has irritation, causes the
irritability or the damage to the skin and the
respiratory tract. Some of them have strong
irritation to eyes.
Avoid such substances contacting skin and eyes and
follow the instruction book of the manufacturer.
Forbid the cyan acrylate adhesive to contact
with skin and eyes. If contact for carelessness,
please put the clean and wet cloth immediately
To Next Page
