EasyManua.ls Logo

Changan BENNI MINI 2011 - Health and Safety Precautions

Changan BENNI MINI 2011
200 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
100-00-5 Overview
100-00-3
Instruction and Operation
Precautions of Health and of Safety
Brief Introduction
Many operations in connection with the service and
maintenance of the vehicle will threaten and
endanger the human health. Plenty of dangerous
operations and its relevant dangerous articles and
equipment are listed below in the alphabetical
(English) order. Please pay special attention to the
following dangerous articles.
Listed contents are not always complete, therefore
the safety and health should be always considered
first during the practical operation.
Before the use of any product, the safety
specification table of the material supplied by the
manufacturer or the supplier of the products should
be firstly consulted.
Acid and Alkali Metals
See Section Electrolyte.
Such as corrosive soda ash or sulfuric acid.
Electrolyte and cleaning material.
Irritable and corrosive substances to skins, eyes,
noses, throats and clothes, inflammable articles and
substances which can damage the normal protection
clothes.
These substances should be avoided from splitting
on skin, eyes and clothes. Suitable protective
overall, gloves and glasses should be worn. Never
inspire the acid fume.
Eye washing bottles, water taps and soaps are
positioned nearby for the use at ay time when
unexpected accident happens.
Signs of Harmful to Eyes shall be placed.
Safety Air Bag
See Section Inflammable Chemical Substance.
Inflammable and Explosive Substance--observance
of the non-smoking regulation.
The safety air bag is installed on the instrument
panel before the steering wheel and passenger(s) for
protecting the life safety of driver and passengers.
Highly explosive substance is contained in the
safety air bag, and when the substance is ignited,
gases of high temperature and high pressure
(2500°C) will be generated.
The gas generating agent used for the air bag is
sodium azide. The sodium azide is sealed in a
module and can be fully released when the air bag
is extended. Never try to open the air bag by
yourself, or the sodium azide will be exploded. If
the gas generator is broken, the complete protective
working clothes must be worn during the treatment.
After the air bag is normally extended, the
protective gloves and glasses must be worn on site
during the treatment.
The used safety air bag should be packed by
using the plastic bags according to the local
regulations strictly and then discarded at the
designated disposal site for chemical waste.
If directly contact with the generated gas, please:
Use water to thoroughly clean the site
(affected area).
Seek medical assistance if necessary.
Air Bag--operations which shall be performed
Position the air bag vertically.
Keep the air bag dry.
The unsealed face shall be toward the human
body when the air bag is carried.
The sealed side of the air bag should be placed
upwards.
Carefully inspect whether the air bag is
damaged.
Stand at the side face when the air bag is
connected.
Identify that all the testing devices have been
correctly calibrated and maintained.
Clean both hands when the expanded air bag is
carried away.
Air Bag--operations which shall be forbidden
It is forbidden to place the inflammable
substance or gas generator together with the air
bag.
The storage temperature of gas generator can
not be more than 80°C.
The air bag can not be inversed.
It is forbidden to open the housing of gas
generator.
It is forbidden to place the gas generator near
open fire or heat source.
It is forbidden to position any object on the air
bag.
It is forbidden to use the damaged air bag.
It is forbidden to contact the air bag and the gas
generator after they are burnt in ten minutes.
It is forbidden to use the electricity meter probe
on the air bag circuit.

Related product manuals