100-00-8 Overview 100-00-8
Description and Operation (Continued)
smog, etc. and avoid the combustion and
explosion caused by such substance.
– Clean hands immediately after touching the
substance.
– The working area shall be kept clean and tidy
without leakage.
– The chemical substance shall be managed and
stored strictly in accordance to the national
and local regulation.
– Avoid the children touching.
Chemical Substance--Forbidden Operations:
– Forbid to mix the chemical substance arbitrarily
without following the manufacturer’s guiding.
Mixing some chemical substances will
generate the harmful substance; the noxious
and harmful gas will be released or the
explosion occurs.
– Forbid to spray the chemical substance in the
narrow space, such as in the automobile with
persons, especially to spray the melting agent
chemicals.
– Forbid to heat or burn the chemical substances
arbitrarily without following the
manufacturer’s guide, some chemical
substances are combustible, and some
substance will release the noxious or harmful
gas when burnt.
– Do not openly put the vessel, the gas emitted
in the vessel will cause the poison to the
human body or cause the explosion. Some
gases lighter than air will accumulate in the
small section.
– Do not transport the chemical substances with
the vessel without being labeled.
– Forbid to wash hands or clothes with the
chemical substances. The chemical substances,
especially the melting agent and fuel will
make the skin dry, and also stimulate the skin
to catch dermatitis, or the hands or clothes
will absorb some noxious and harmful gas
through the skin.
– Forbid to store other articles with the empty
tank which once used to store the chemical
substance without the special treatment.
– Do not smell the chemical substance. The
sudden gases of high concentration will cause
the poisoning or cause the injury.
Clutch Oil
See Section Braking Fluid.
Corrosion Preventing Material
Please see Sections Melting Agent and Fire
Prevention simultaneously.
Because the corrosion preventing material belongs
to the inflammable substance, please follow the
regulation of No Open Flames.
Because the substance has various types, please
follow the instruction book of the manufacturer.
The melting agent, the resin or the product oil may
be contained in the substance. The substance shall
be avoided touching skin and eyes. The substance
can not be sprayed in the enclosed space and only
can be sprayed in the conditions of well ventilation.
Cutting
Please see Section Wielding.
Wax Removal
See Section Melting Agent And Fuel (Kerosene).
Dust
The dust may be poisonous and stimulate the
human skin. Avoid inhaling the ash of the powder
chemical substance or other ashes. Wear the
respirator when the air is not smoothly circulated.
The extra fine dust of the inflammable material will
cause the explosion. The explosive threshold and
ignition source shall be avoided.
Electric Shock
Incorrectly using or using the electrical equipment
with defects will cause the electric shock.
The electrical equipment shall be regularly detected
and the equipment shall be ensured to be perfect.
The equipment with defects shall have the clear
label and be removed from the working area.
Ensure that the conducting wire, the cable, the
plug and the socket have no abrasion, knotting,
cutting, cracking or other damages.
Do not make the electrical equipment and the
electric wire contact with water.
Ensure that the electrical equipment is
protected by the fuse.
Correctly use the electrical equipment and do
not use the device with problems, and violation of
this operation will cause the fatal danger.
To Next Page
