203-02-5 Drum Type Brake 203-02-5
Disassembly and Installation
BENNI MINI
REMOVAL AND INSTALLATION
Brake Drum (12 275 0)
Disassembly
1. Disassemble the decorative plate of the controlling rod of the parking brake See Section 501-05 for
relevant information.
2. Dismount the controlling rod of the parking brake and loosen the adjusting nut.
3. Loosen the wheel nuts.
4. Hoist the automobile. See Section 100-02 for relevant information.
5. Disassemble the wheels.
6.
Cautions: If the sealing cover of the grease cap is damaged, replace it during the installation.
Disassemble the grease sealing cover.
To Next Page
