203-02-8 Drum Type Brake 203-02-8
Disassembly and Installation (continued)
长安·奔奔MINI
7. Loosen the fixing nuts of the brake drum
Disassemble the brake drum.
1. Disassemble the nuts.
2. Disassemble the brake drum.
Installation
Caution: If the wheel hub fixing nut is screwed, do not loosen it any longer. If the torque adjustment is
required, the wheel hub fixing nut must be screwed after being loosened for two circles.
1. The installation is performed according to the procedures opposite to the disassembly procedures.
To Next Page
