201-00-16 Suspension System-General Information
Diagnosis and Testing (Continued)
• Does there have free movement?
Yes
Replace the ball head. See Section 201-01 for
relevant information. Test and run the system to
determine if it works normally.
No
Switch to E5
E5: Check the front wheel bearings
1 Check the front wheel bearings
- Hold the bottom and top of wheel and sway
forcefully. Check if bearings excessively loosen
.
- Rotate the front wheel, and check the working
status
.
• Does bearing loosen or have sound?
Yes
If necessary, replace the front wheel bearings.
See Section 203-02 for relevant information.
Test and run the system to determine if it is
normal.
No
Switch to E6
E6: Check the tyre
EE
1 Check the wear unevenness of the tyre.
• Is tyre wear uneven?
Yes
Replace the tyre. Perform wheel alignment. Test
and run the system to determine if it is normal.
No
Confirm the failure customer described.
Benni Mini
To Next Page
