202-01-3 Driving Axle 202-01-3
INSTRUCTION AND OPERATION
BENNI MINI
DESCRIPTION AND OPERATION
Driving axle
Constant speed universal joints are arranged at both
sides of the driving axle.
The internal constant speed universal joint (constant
speed ball or three-pin universal joint, roller or steel
ball and housing of the universal joint) are installed on
the driving axle.
The external constant speed universal joint (composed
of steel balls, rolling ball retaining frames and the
housings of the universal joints) are installed at sides of
the wheels.
The internal constant speed universal joint is fixed on
the differential gear through a differential spring ring.
The external constant speed universal joint is fixed on
the wheel hub bearing.
The external constant speed universal joint is fixed on
the wheel hub bearing.
The exploded view of the driving axle
To Next Page
