202-01-18 Driving Axle 202-01-18
DISASSEMBLING AND INSTALLATION
BENNI MINI
Dust shield of the external constant speed universal joint (including the universal joint)
General Tool
Retaining ring caliper
Name
Model
High
performance
grease
G.A.Cpalex GTE
Tape
Disassembly
1．Warning: The hexagonal socket wrench Is used
to prevent the piston rod from rotating.
Loosen the fixing nuts on the left and right front
2. Disassemble the wheel and tyre. See Section
201-03 for relevant information.
Take out the locking pin, and use the socket wrench of
32mm to loosen the wheel hub nuts.
3. Automobile hoisting. See Section 100-01 for
relevant information.
4．Disassemble the front oscillating arm in the
steering knuckle.
To Next Page
Loading...
