Char-Broil 463240015 User Manual (English)

Questions and Answers:

S
Stephen AvilaAug 14, 2025
Why no sparks when I press the ignition button on my Char-Broil 463240015?
- C
  courtney93Aug 14, 2025
  If no sparks appear at any electrodes and no noise is heard when you press the electronic ignition button on your Char-Broil Gas grill, several issues could be the cause. First, check if the battery is installed correctly, ensuring the “+” and “–” connectors are oriented correctly, with “+” on the cap end. If the battery is dead, replace it with a new alkaline battery. Also, the button assembly might not be installed properly; unscrew the button cap assembly and reinstall it, making sure the threads are aligned and engaged fully. Finally, the spark module itself might be faulty, requiring replacement.
M
mosleyjenniferAug 17, 2025
Why are sparks weak on my Char-Broil 463240015 electrodes?
- G
  gmyersAug 17, 2025
  Weak sparks or sparks not present at all electrodes on your Char-Broil Gas grill may be due to several reasons. Check that all output lead connections are securely connected at the module and electrodes. Inspect for arcing to the grill away from the burners by observing the grill in a dark location while operating the ignition system. A weak battery can also cause this issue, so replace it with a new alkaline battery. Ensure the electrodes are dry by using a paper towel to remove any moisture. Finally, check if the electrodes are cracked or broken, and replace them if necessary.
N
Norma BakerAug 21, 2025
Why no sparks from Char-Broil 463240015 with ignition noise?
- M
  Melissa SchwartzAug 21, 2025
  If you hear noise from the spark module but see no sparks at the electrodes on your Char-Broil Gas grill, the output lead connections may not be connected. Remove and reconnect all output connections at the module and electrodes.
A
angelica26Aug 25, 2025
How to fix a Char-Broil 463240015 burner that won't light from others?
- D
  Donna WilliamsAug 25, 2025
  If one burner on your Char-Broil Gas grill does not light from the other burners, it is likely due to grease buildup or food particles in the end(s) of the carryover tube(s). Clean the carry-over tube(s) with a wire brush to resolve this.
D
daltonphamAug 27, 2025
Why is my Char-Broil Gas grill flaring up?
- C
  Cesar LarsonAug 27, 2025
  Flare-ups in your Char-Broil Gas grill can occur due to several reasons. One common cause is grease buildup on the burners and inside the grill/firebox, so cleaning these areas is recommended. Another reason could be excessive fat in the meat you're grilling; trimming the fat before cooking can help. Finally, excessive cooking temperature can also cause flare-ups, so adjust the temperature accordingly to a lower setting.
J
Jacob MoralesAug 31, 2025
How to fix a sudden drop in gas flow in my Char-Broil Gas grill?
- M
  Mackenzie MccartyAug 31, 2025
  A sudden drop in gas flow or low flame in your Char-Broil Gas grill can be caused by a few things. First, check if your LP cylinder is out of gas. If not, the excess flow valve might have tripped; try turning off the knobs, waiting 30 seconds, and then lighting the grill. If the flames are still low, turn off the knobs and LP cylinder valve, disconnect the regulator, reconnect it after leak-testing, turn on the LP cylinder valve, wait 30 seconds, and then light the grill. Lastly, a vapor lock at the coupling nut/LP cylinder connection could be the issue; turn off the knobs and LP cylinder valve, disconnect the coupling nut from the cylinder, reconnect it, and try again.
E
Elizabeth BanksSep 3, 2025
What to do if the flames blow out on my Char-Broil 463240015 Gas grill?
- K
  Kevin WrightSep 3, 2025
  If the flames on your Char-Broil Gas grill are blowing out, it could be due to high or gusting winds; try turning the front of the grill to face the wind or increase the flame height by turning the gas valve to a higher position. Another cause might be low LP gas, so refill the LP cylinder. Also, the excess flow valve might have tripped. Refer to the troubleshooting steps for a sudden drop in gas flow.
A
Ashley LangSep 6, 2025
How do I stop a persistent grease fire in my Char-Broil 463240015?
- M
  Mary Terrell DVMSep 6, 2025
  To stop a persistent grease fire in your Char-Broil Gas grill, turn the knobs to the OFF position and turn the gas off at the LP cylinder. Leave the lid in position and let the fire burn out. After the grill cools, remove and clean all parts.
M
moralesyvonneSep 10, 2025
What causes flashback in my Char-Broil 463240015 Gas grill burner tubes?
- D
  Deborah ReynoldsSep 10, 2025
  Flashback, or fire in the burner tubes of your Char-Broil Gas grill, is usually caused by blocked burners and/or burner tubes. To resolve this, turn the knobs to the OFF position and clean the burner and/or burner tubes.