To Next Page
T
Tyler Macdonald MDOct 30, 2025
What to do if Char-Broil Classic C-46G3D 463211512 burner won't light with ignitor?
- PPamela GouldOct 31, 2025
If the burner on your Char-Broil grill won't light using the ignitor, there are several potential causes and solutions. First, ensure you are trying to light the correct burner, consulting the control panel and the Use and Care section for instructions. Check that the burner is properly engaged with the control valve, ensuring the valves are positioned inside the burner tubes. Inspect the burner tubes for obstructions such as spider webs. If there's no gas flow, verify that the LP cylinder isn't empty; if it's not, refer to 'Sudden drop in gas flow'. Also, make sure the coupling nut and LP cylinder valve are fully connected, tightening it by hand until snug. A vapor lock might be the issue, so turn off the knobs, disconnect the coupling nut, reconnect it, and try again. The electrode may b...
General
