14
EN
Turn o the machine using the
switch on the back of the machine.
To reset the parameters (time,
amount of energy and power),
press the “stop” button.
Always use the laser handpiece with the applicator supplied.
We recommend performing the calibration procedure prior to every
treatment.
To switch the device o securely: complete the treatment and stop
emitting from the laser, turn the unit o with the button at the back of
the machine, ensure it is positioned at “0”.
To complete the disconnection, for optimal safety, remove the power
cable from the device.
2.1 How to use
the handpiece
To Next Page
Loading...
