32
EN
6. Maintenance
The Intelect HPL 7 and HPL15 laser system does not require particular
maintenance procedures; however it is recommended for use in areas which
are free of dust and the machine should be cleaned carefully.
6.1 Ordinary
maintenance
To clean the calibration socket use
a cotton bud moistened with liquid
detergent.
Dry immediately with a clean
cotton bud.
To clean the laser protection
window use a jet of dry
compressed air.
If the window is very dirty a cotton
bud moistened with ethyl alcohol
can be used; dry immediately with
a jet of dry compressed air.
To clean the screen and the case
use a professional microfiber wipes
for screen cleaning.
Careful cleaning of the screen
avoids future problems with the
function of the touchscreen.
To Next Page
Loading...
