CHCNAV CHC E91 - Connecting to a Controller

Getting Started with E91
17
2.6 Connecting to a Controller
2.6.1 Connecting via Wi-Fi with LandStar 7 Software
Turn on the controller → run LandStar 7 → go to Config main menu → tap Connect.
In the Connect screen, select CHC for the Manufacture field, E91 for Device Type field,
WIFI for Connection Type field.
Tap the Wireless Lan icon on the right side to select the hot-spot → Switch on the WiFi
module by the top switch → tap refresh button to search the hot spot around → select
the target device in the list.
Tap Connect to link to the hot spot. If the first-time connection to this hot spot, user
may type in the password.