Configuring Through a Web Browser
44
5.5 IO Settings Menu
Use the IO Settings menu to set up all receiver outputs and inputs. The receiver can
output CMR, RTCM, Raw data, Ephemeris data, GPGGA, GPGSV, on TCP/IP, UDP, serial
port, or Bluetooth ports.
5.5.1 IO Settings Submenu
The following figure shows an example of the screen that appears when you select this
submenu.
In this submenu, users can configure 6 types of input and output settings.
1. RTK Client
After configuring the settings of RTK client, users can log on CORS or APIS. Tap
the Connect button to the right → the IO Settings screen will appear → choose
one of the connection protocols among the NTRIP, APIS_BASE and APIS_ROVER
→ configure the related parameters → click to log on CORS or APIS.
➢ Connection Protocol: NTRIP
To Next Page
Loading...
