Check Point 16000 - Creating the Network Object

Configuring 16000 Appliances
16000 Appliances Getting Started Guide|34
Creating the Network Object
Configure a Security Gateway object on the Management Server:
1.
Connect with SmartConsole to the Management Server.
2.
Configure a new Security Gateway object for the appliance.
3.
Enter the IP address for the appliance.
4.
Create Secure Internal Communication (SIC) between the Security Gateway and the Management
Server. Enter the activation key you used in the First Time Configuration Wizard.
5.
Configure the topology.
6.
Configure and install the Security Policy.