Wireless Network
Quantum Spark 1535 / 1555 Appliance Getting Started Guide|34
Wireless Network
For WiFi models only:
In the Wireless Network page, configure wireless connectivity details.
When you configure a wireless network, you must define a network name (SSID). The SSID (service set
identifier) is a unique string that identifies a WLAN network to clients that try to open a wireless connection
with it.
We recommend that you protect the wireless network with a password. Otherwise, a wireless client can
connect to the network without authentication.
To configure the wireless network now:
1. Select Configure wireless network now.
2. Enter a name in the Network name (SSID) field. This is the name shown to clients that look for
access points in the transmission area.
3. Select Protected network (recommended) if the wireless network is protected by password.
4. Enter a Password.
5. The Hide password option is selected by default.
6. Allow access from this network to the local network is selected by default. This means the wireless
network is considered trusted and access is allowed from it to the local network.
7. Radio Band
n
2.4GHz: 2.412~2.472GHz
n
5GHz: 5.150~5.850GHz / 4.920~5.850GHz
To Next Page
Loading...
