6
1 Select configuration mode by pressing the Prog
key.
The decimal point on the seven-segment display
flashes.
2 Press the key between F1 and F12 that
corresponds to the delay time.
3 Exit configuration mode by pressing the Prog
key.
The decimal point on the seven-segment display
is no longer illuminated.
Configuration example: Setting a delay time of
30 msec
¾ Press the Prog, F8, and Prog keys in that order.
Changes to the caps lock or number lock status
after pressing a PF key
If number lock or caps lock is activated, this status
may change following the string output. This
occurs if there is insufficient delay time and can be
resolved by setting a longer delay time.
10 Cleaning of the keyboard
Caution!
Damage may be caused by harsh cleaning agents
or liquids in the keyboard
1 Do not use solutions such as gasoline or alcohol
and scouring agents or scouring sponges for
cleaning.
2 Prevent fluids from entering the devices.
3 Do not remove the keycaps of the keyboard.
F10 70
F11 100
F12 200
Key Delay in msec
1 Clean the keyboard with a slightly damp cloth
and some mild cleaning agent
(e.g.: dishwashing liquid).
2 Dry off the devices with a soft, lint-free cloth.
11 RSI syndrome
RSI syndrome
RSI stands for "Repetitive Strain Injury". RSI arises
due to small movements continuously repeated
over a long period of time.
Typical symptoms are discomfort in the fingers or
neck. For further information see: www.cherry.de/
english/service/servicedownload_rsi.htm
1 Set up your workspace ergonomically.
2 Change the angle of the keyboard using the rear
supports.
3 Take several short breaks, with stretching exer-
cises if necessary.
4 Change your posture often.
12 Disposal
Dispose of the old unit via a
collecting point for electronic scrap or
via your dealer.
To Next Page
Loading...
