CHERUBINI A510073 - Operating Modes Overview; Mode 1 D (Duplicate Load)

24
OPERATING MODES
MODE 1D (duplicate load)
This Dimmer allows you to congure and control the two outputs with
two different modes:
• 1D a duplicate load (factory setting).
• 2L two independent loads.
To change mode, see page 28.
This mode allows you to control both Dimmer outputs together.
Skipper / POP series remote controls
1
2
B
1
2
A
+
+-
1
2
+ -
DIM+ 1/2
Button A (up) turns on and
increases the brightness
of outputs 1 and 2.
ON/OFF 1/2
Button B (stop) turns
outputs 1 and 2 on
and off.
DIM- 1/2
Button C (down) turns on
and decreases the
brightness of outputs 1 and 2.
Giro series remote controls
STOP
1
2
UP
1
2
DOWN
1
2
+ +- -
DIM+ 1/2
Rotate in the UP
direction to turn on and
increase the brightness
of outputs 1 and 2.
ON/OFF 1/2
The STOP button turns
outputs 1 and 2 on
and off.
DIM- 1/2
Rotate in the DOWN
direction to turn on and
decrease the brightness
of outputs 1 and 2.
GB