4. Select the memory point to edit. Use the sort
feature to sort by distance, icon, name, or date
as needed.
5. Touch the Name screen button from the EDIT
MEMORY POINT screen.
6. Use the backspace screen button to delete the
current name or use the alpha keypad to make
changes.
Select the Show Name On screen button to have
the name of the point appear on the map screen.
7. Touch the back screen button to store the change.
To change the icon associated with a memory point:
1. Touch the Memory Points screen button from
the STORED LOCATIONS screen.
2. Select the folder/category that the memory point
exists in.
3. Select the List screen button.
4. Select the memory point to edit. Use the sort feature
to sort by distance, icon, name, or date as needed.
5. Touch the Icon screen button from the EDIT
MEMORY POINT screen.
6. Select the desired icon. There are two pages
(52) icons, six icons that have sounds associated
with them, and a No Icon button to select from.
Select the With Sound screen button, and the
sound icons will display. To hear the sound of the
icon, touch the Sound screen button next to
each icon. If the sound icons are used, the
associated sound will be heard when the vehicle
is approximately 650 ft (200 m) from the
memory point.
Select the No Icon screen button to not have an
icon associated with the point.
The new icon will display in the EDIT MEMORY
POINT screen, next to the Icon screen button.
7. Touch the back screen button to store the change.
2-25
To Next Page
Loading...
