10-32 Vehicle Care
2. Turn the lamp assembly down to
remove it from the fascia.
A. Bulb Socket
B. Bulb
C. Lamp Assembly
3. Turn the bulb socket (A)
counterclockwise to remove it
from the lamp assembly (C).
4. Pull the bulb (B) straight out of
the bulb socket.
5. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
6. Turn the lamp assembly into the
fascia engaging the clip side
first.
7. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Back-Up Lamp 921
Front Parking/Turn
Signal Lamp
7444NA
High‐Beam
Headlamp
9005LL
License Plate Lamp W5W LL
Low‐Beam
Headlamp
H11
Rear
Sidemarker Lamp
194LL
Rear Turn
Signal Lamp
4157NAK
Stop Lamp/Taillamp 7444LL
For replacement bulbs not listed
here, contact your dealer.
To Next Page
Loading...
