140 Climate control
red = warm
blue = cold
Heating will not be fully effective until
the engine has reached normal
operating temperature.
Air distribution
Select air outlet by turning the
centered knob.
L
= to head area and foot well
K
= to foot well, with a small
amount of the air being
directed to windscreen, front
door windows and side air
vents.
M
= to head area via adjustable air
vents
J
= to windscreen and foot well,
with a small amount of the air
being directed to front door
windows and side air vents.
V
= to windscreen and front door
windows, with a small amount
of the air being directed to side
air vents.
Fan speed
Adjust the air flow by switching the fan
to the desired speed.
Heating
Normal heating
1. Type 1: Move recirculation lever
to the right for the recirculation
mode.
Type 2: Press the recirculation
button for the recirculation mode.
An indicator light comes on to
show that the recirculation is on.
2. Turn air distribution knob.
3. Turn fan control knob to desired
speed.
Maximum heating
Use the maximum heating mode for
quick heating of the passenger area.
Do not use it for lengthy periods. It can
result in an accident because the
interior air may become stale and the
windows may fog causing loss of
driver's visibility.
To clear the windows:
Type 1: Turn the air distribution knob
to V and move the recirculation lever
to the left to allow fresh air into the
vehicle.
Type 2: Turn the air distribution knob
to V and set the recirculation mode
to outside air mode to allow fresh air
into the vehicle.
For maximum heating:
1. Type 1: Move recirculation lever
to the right for the recirculation
mode.
Type 2: Press the recirculation
button for the recirculation mode.
An indicator light comes on to
show that the recirculation is on.
2. Turn temperature control knob all
the way to the red area for
heating.
3. Turn fan control knob to maximum
speed.
To Next Page
Loading...
