Vehicle care 195
The tyre repair kit is in a compartment
under the floor cover in the load
compartment.
1. Take the tyre repair kit from the
compartment.
2. Remove the compressor and the
sealant bottle.
3. Remove the electrical connection
cable and air hose from the
stowage compartments on the
underside of the compressor.
4. The switch on the compressor
must be set to §.
5. Screw the compressor air hose to
the connection on the sealant
bottle.
6. Connect the compressor plug to
the accessory socket. To avoid
discharging the battery, we
recommend running the engine.
7. Fit the sealant bottle into the
retainer on the compressor.
Set the compressor near the tyre
in such a way that the sealant
bottle is upright.
8. Unscrew valve cap from defective
tyre.
9. Screw the filler hose to the tyre
valve.
To Next Page
Loading...
