Recording Complete Data Set
2) To record complete set of live data, use UP/DOWN scroll button
to select Complete Data Set from Record Data menu and press
ENTER button.
………………..Record Data……… ……..
1/3
►Complete Data Set
Custom Data Set
Unit of Measure ?
3) Use UP/DOWN scroll button to select a trigger mode and press
ENTER button.
…….……Pick Trigger Mode……… ……
1/2
► Manual Trigger
DTC Trigger ?
z If data from previously tested vehicle is not erased, data from
current test will be stored in a temporary cache. Following
screen shows when Manual Trigger is selected:
36
To Next Page
Loading...