A previous recording
exists! Do you want
to overwrite it?
YES NO
z If you wish to proceed with overwriting the old recording,
press ENTER button; if you do not wish to overwrite it, use
LEFT/RIGHT button to select NO or press ESC button to
pick another memory location.
5) Observe on-screen instructions.
z If Manual Trigger is selected, following screen shows:
……………Manual Trigger……………...
Ready to record!
Press [ENTER] to
start recording…
Press [ESC] to exit
z If DTC Trigger is selected, following screen shows:
………………….DTC Trigger……………..
To Next Page
Loading...