pos
Maintenance & repair of EHS350C cut-off saw
pends on the
conditions of the cutting jobs as well as material
being cut both wet or dry. For dry cutting,
maintenance is required every 48 hours.
instructions, see below (Ref. Fig.11)
itioning knob(2) to continue cutting.
Fig. 10
Cleaning and maintenance of the air filter 1.
Dust and foreign build-up accumulated on the air
filter may affect engine performance, increase fuel
consumption, and cause difficulty in starting.
Therefore, it’s important to perform regular
maintenance. The frequency of this de
For
34
Fig 11
To Next Page
Loading...