China Hangyu EHS350C - Operation Guide to EHS350 C Cut-Off Saw; Before Starting Procedures

Thickness 2.66 mm (0.1 – 0.24”)
Arbor hole diameter ng on where it is used) 25.4 mm / 20mm (dependi
Types Composite abrasive blade or Diamond abrasive blade
Blade
Cutting depth (with thrust
plate dia. 115 mm)
Max. 115mm (4-1/2”)
Sound level 110dB(A)
Overall dimensions 750×360×300 mm ( 29.5” x 14”x 12”)
The
Whole
Unit
Net weight 12.5 kg, (27 lbs)
Operation Guide to EHS350C cut-off saw
1. Before
Prep cludes clear up and arrangement of work surroundings, wearing proper
loth ction and inspect f saw. In preparation, please follow
p l
prep starting, plea ions given below:
a) Before starting, check if there is any fuel left in the fuel tank.
starting
aration in
c
the
ing and prote ing of the cut-of
rocedures described in the appropriate section of this manual. For additiona
aration work before se follow instruct
22
. Fueling: