b) This engine is engineered to operate on mixture of unleaded gasoline and quality
er thoroughly.
a.
b.
two-stroke engine oil. Octane rating of the gasoline should at least be 93.
c) Gas to Oil mix ratio is 50:1.
d) When mixing fuel, pour engine oil into the canister first, and then add gasoline
(make sure the mix ratio is 50:1). Shake the mixture in the canist
Clean the fuel tank cap and the area around it as necessary to
into the tank. Finally pour the fuel mixture into the tank and
ensure no dirt falls
tighten fuel tank cap
securely.
Only mix sufficient fuel for a few days work, the maximum storage time ofe)
fuel is 3 months.
mixed
. Choosing the right blade:
Blade diameter can be 300 mm (12”) or 355 mm (14”). Choose an appropriate size
and type of blade which best suits the cutting work, the blade size needs to be fitted
with the blade guard. The diameter of the arbor hole should match that of the blade
shaft (1” o
23
r 20mm or other sizes depending on the different country standards).
Blade thickness should be within the range of 2.6-6 mm (.100” – .240”).
Blade types:
To Next Page
Loading...