For your reference, choose composite abrasive blades for cutting of asphalt,
concrete, stone, brick, steel and plastics. Choose diamond abrasive blades for
utting of Asphalt, Concrete, Stone, Hard rock, Brick, etc.
e: There is a rotation direction indicator marked on each diamond blade. When
mounting, make sure it corresponds to the rotation direction of the arbor.
If you are not sure which blades are proper for your cutting jobs, co
c
Not
ntact your
tor for information.
c
es in the blade shaft.
●
dealer or distribu
. Fitting/Replacing the blade: (Ref. Fig.5)
● Gently press down on the shaft lock (1), use the combination wrench to turn
the blade (5) back and forth until the shaft lock engag
24
● Use the combination wrench to loosen and unscrew the hexagon bolt (2).
● Remove the metal washer (3), the flange (4) from the blade shaft together with
the blade to be replaced.
● Mount the new blade.
● Fit the flange(4) and metal washer(3).
● Screw in the hexagon bolt (2) and tighten it with the combination wrench.
Finally let go of the shaft lock so that the blade can turn freely.
To Next Page
Loading...