8. Full Throttle Lock Button
9. Throttle Trigger
10. Rear Handle
11. Filter Cover Lock Lever
12. Air Filter
13. Choke Lever
14. Starter Grip
15. Fuel Tank Cap
16. Decompression Valve
17. Water Attachment
18. Tensioning Nut
19. Muffler
20. Blade Guard Positioning Knob
21. Shaft lock
1. Blade:
Diamond or abrasive blades. Depending on t, these blades are
made of different materials. Be sure to being cut.
The maximum diameter of the blade for th ating speed of
the blade should be above or equal to 47
2. Flanges:
Clamp and support the diamond or abrasive blad
the material to be cu
6
choose right blade for the material
e saw is 14 inch. And the oper
00 RPM.
e.
To Next Page
Loading...