IRIS Touch Engineering Manual Version 1.4 Page 3 of 40
1. Introduction
The IRIS Touch offers cost effective Alarm over IP (AoIP) for the commercial and residential sectors.
All IRIS Touch diallers are certified as suitable for all Grade 4 systems with an Alarm Transmission System (ATS)
configuration up to SP6 for single path, or ATS configuration DP4 for dual path (IRIS Touch 640NG only).
The IRIS Touch is based on Chiron’s successful IRIS Touch range of AoIP diallers with the same hardware and
software used in all IRIS diallers; with the same level of security and features provided to military, governments,
banks and commercial industry markets.
Polling and alarm transmission are performed via the Ethernet or GPRS/3G communication paths (4G and CDMA on
request) to the monitoring centre using the IRIS Secure Apps monitoring software.
To Next Page
Loading...