Chord DAVE User Manual

Chord Electronics
DAVE | Manual
_
DISPLAY SETTING AND
THE SCREEN GOING
BLACK: When you make
a new selection via the menu,
DAVE needs to write this to its
internal memory. This will cause
the display to temporarily show a
black screen.
For darker environments, bright
displays may present a challenge,
therefore, DAVE oers four
dierent menu display settings.
Find this listed under Display in
the menu.
5.1 The screen & navigating
the menu
5.2 Sample rate
The screen & navigating
the menu
5.1
23 // 35
Turn the dial to increase or lower
the volume. Press the volume dial
to mute/unmute DAVE
THE MENU: To advance your way
through the menu, press the four
buttons surrounding the volume
dial.
Use the up and down buttons to
cycle through menu options on
the screen. Using the left and
right buttons, you can change
the options in the sub-menus.
Down through
menu
Up through
menu
Right through
menu *
Left through
menu *
* Hold down these buttons to change between modes

Chord DAVE Specifications

Audio Specifications

frequency response	20Hz to 20kHz
THD + N	127.5dB
channel separation	>125dB @ 1KHz
dynamic range	127.5dB

Digital Inputs and Outputs

digital inputs	4 x 75Ω SP/DIF BNC Coax 44.1KHz - 384KHz
AES balanced XLR input	44.1KHz - 96KHz
plastic fibre optic inputs	2 x TOSlink 44KHz - 192KHz
USB input	44KHz - 768KHz PCM + DSD
analogue outputs	2 x RCA Phono, 2 x Balanced XLR
headphone output at 300 ohm	1% THD 6.8v RMS (154 mW)
headphone output at 33 ohm	1% THD 6.8v RMS (1.4W)

Power and Dimensions

power supply	90V AC - 250V AC auto switching 50 - 60HZ
dimensions	338 x 60 x 145mm (Width x Height x Depth)
weight	7Kg