Chord Electronics
Ultima | Manual
_
Chord Electronics
Ultima | Manual
_
24 // 30 25 // 30
Placement 4.1 Connecting Ultima
to ancillary equipment
4.2
4.1 Placement
4.2 Connecting Ultima to
ancillary equipment
4.3 Audio inputs
4.1 Placement
4.2 Connecting Ultima to
ancillary equipment
4.3 Audio inputs
4.4 Audio outputs
4.5 Power- on sequence and 12V trigger
4.6 Earthing issues in Europe
4.4 Audio outputs
4.5 Power-on sequence and 12V trigger
4.6 Earthing issues in Europe
Whilst Ultima will operate normally
within a Chord Electronics Reference
configuration stacked via the Integra
legs, it is recommended that Ultima is
allowed to ‘breathe’ with 10cm of space
around it to convection-cool during
operation.
When connecting the Ultima to
equipment within the signal path,
ensure all devices are switched o. It is
recommended that once all equipment
is properly connected, that the volume
setting is operated to its lowest
setting, before slowly being raised to
a comfortable listening level. Always
observe partnering manufacturers’
guidelines.
To Next Page
Loading...
