EasyManua.ls Logo

Chris-Craft Launch 28 - Spring Commissioning

Chris-Craft Launch 28
302 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4–4 Chris-Craft
Storage and Commissioning
Spring Commissioning
General
_______ Clean all sections of the boat as necessary.
_______ Inspect all thru-hull openings. Ensure they are clean and open.
_______ Check running gear. Replace propellers if removed.
_______ Check all life saving gear. Replace as necessary.
_______
Cycle all seacocks and valves to ensure proper and free movement. Leave open appropriate
valves. Check hoses and clamps. Re-install all drain plugs.
_______ Inspect the electrical system completely.
_______ Inspect navigation lights and check for proper operation.
_______ Check all switches for proper operation.
_______
Ensure engine compartment blower is operating properly. Make sure exhaust vent(s) are not
obstructed.
_______ Inspect, and if necessary replace, anchor lines and gear.
Fuel System
_______ Thoroughly check each fitting and hose in the fuel system. Ensure it is fuel and vapor tight.
_______ Open any valves closed for winterization.
Engines
_______ Refer to the engine owner’s manual for detailed recommissioning instructions.
_______ Ensure fluids are at proper levels.
Batteries
_______ Ensure batteries are clean and corrosion-free before installing.
_______ Ensure batteries are properly secured in their mounts.
Fresh Water Systems
_______ Connect any water lines that may have been removed or disconnected.
_______ Energize pressure pump and check for leaks.
_______
Sanitize the system. Flush the system completely. If necessary drain and re-flush. Ensure all
contaminants are removed from the system.

Table of Contents

Related product manuals