What to do if lens shift does not work correctly on my Christie Projector?
If the lens shift on your Christie Projector isn't working correctly, turn off the projector and ensure the lens unit is correctly installed. Also, check for and remove any obstacles around the lens. If the issue persists, contact your dealer or a service company.
How to fix unstable images when turning on my Christie DS Projector?
If images projected from your Christie Projector are unstable immediately after turning it on, wait for more than 20 minutes before starting to adjust the superimposed images.
What to do if my Christie DS Projector is waiting for an image file?
If your Christie Projector is waiting for an image file, check the hardware connection, the projector's settings, and network-related settings. The computer-projector network connection might be disconnected, so try reconnecting them.
How to fix no input signal on Christie DS?
If your Christie Projector displays 'no input signal,' confirm the signal input connection and check the status of the signal source.
What to do if the air filter is clogged or dirty in my Christie DS?
If the air filter in your Christie Projector is clogged or dirty, check and clean it. First, make sure the power cord is unplugged, and then allow the projector to cool down sufficiently before you start.
What to do when it is time to clean the air filter of my Christie DS Projector?
If it's time to clean the air filter on your Christie Projector, immediately turn the power off. Clean or change the air filter. After cleaning or changing the air filter, reset the filter hours.
What to do if my Christie DS Projector cooling fan is not operating?
If the cooling fan in your Christie Projector is not operating, turn the power off and allow the projector to cool down for at least 20 minutes. Once cooled, check that no foreign matter is obstructing the fan. Turn the power back on. If the issue persists, contact your dealer or a service company.
Why is my Christie Projector's internal temperature rising?
If your Christie Projector's internal temperature is rising, turn the power off and allow it to cool down for at least 20 minutes. Then, check for any blockage of the air passage aperture, ensure the air filter is clean, verify that you're using the unit within the specified temperature range (0°C to 40°C or 45°C), and confirm that exhaust air from other equipment isn't blowing against the projector's ventilation opening. After checking these items, turn the power back on.
What to do if my Christie Projector shows smoke or emits a strange odor?
If your Christie Projector is emitting smoke, a strange odor, excessive sound, or if you notice damaged components or penetration of foreign materials, immediately disconnect the power plug from the outlet. After ensuring the smoke or odor has stopped, contact your dealer or a service company for assistance.
Why Christie Projector images do not superimpose well?
Images from your Christie Projector may not superimpose well enough especially when the screen is slanted, deformed, or the surface is uneven, depending on the installation and surrounding environment.
General| Type | DLP |
|---|---|
| Lamp Life | 2000 hours |
| Light Source | Xenon lamp |
| Warranty | 3 years |
| Lens Options | Multiple interchangeable lenses (wide, standard, long throw) |
To Next Page
