Stand trans upright on bellhousing
Chain cover must be free of old sealant, dirt and
oil before applying new sealant. Apply a 1/8 inch
bead of sealant to flange of cover.
Fig. 318 Install Output Shaft Sprocket Snap Ring
and Wave Washer
1 – WAVE WASHER
2 – SNAP RING
Fig. 319 Install Chain Snubber
1 – CHAIN SNUBBER
Fig. 320 Install Chain Oiler
1 – CHAIN SNUBBER
2 – CHAIN OILER
Fig. 321 Install Chain Cover
1 – TRANSAXLE CASE
2 – CHAIN COVER
21 - 108 42LE TRANSAXLE LH
DISASSEMBLY AND ASSEMBLY (Continued)
To Next Page
Loading...
