CHUNLAN -B - Dismantling Sequence of Indoor Unit of FR(D)71-B and FR(D)100-B; Remove

Exploded view & dismantling sequence of parts
- 12 -
3. Dismantling sequence of indoor unit of FR(D)71-B and FR(D)100-B
(1) Remove 18
(2) Remove 17
(3) Remove 4, 3, 15
(4) Remove 2
(5) Remove 1
(6) Remove 5, 6
(7) Remove 12
(8) Remove 14
(9) Remove 13
(10) Remove 8
(11) Remove 9
(12) Remove 16, 17
(13) Remove 10, 11
Annex: Dismantling sequence of typical parts
Indoor capacitor
(1) Remove 1
(2) Remove capacitor.
Indoors motor:
(1) Remove electric box 18
(2) Remove plug of indoor motor from control board in electric box.
(3) Remove air intake plate 1
(4) Remove top plate assembly 2 with 3, 4 and 15
(5) Remove spiral casing 5 and impeller 6
(6) Remove motor 12 and capacitor.
Note: FR(D)71-B and FR(D)100-B have two air return modes: lower air return and rear air
return. This exploded view and dismantling sequence is based on rear air return.