CHUNLAN -B - Dismantling Sequence of Indoor Unit of FR(D)180;S and FR(D)260;S

Exploded view & dismantling sequence of parts
- 28 -
3. Dismantling sequence of indoor unit of FR(D)180/S and FR(D)260/S
(1) Remove 1;
(2) Remove 2;
(3) Remove 8, 4;
(4) Remove 14, 16
(5) Remove 23;
(6) Remove 7;
(7) Remove 3;
(8) Remove 5;
(9) Remove 22.
Annex: Dismantling sequence of typical parts
Indoors right motor capacitor (seen from air exhaust):
(1) Loosen tapping screw on retainer 26, rotate retainer 26;
(2) Remove right small hole cover plate assembly 10
(3) Remove capacitor clip 20.
Indoors left motor capacitor (seen from air exhaust):
(1) Remove 1;
(2) Remove capacitor clip 20.
Indoor motor:
(1) Remove 1;
(2) Remove 14;
(3) Same method as for motor removal for FR(D)95 and FR(D)125/S.
Note: FRD180/S auxiliary electric heating box outline is the same as FRD95 auxiliary electric
heating box; two such boxes are provided. FRD260/S auxiliary electric heating box outline is
the same as FRD125/S auxiliary electric heating box; two such boxes are provided. Method of
dismantling is the same as for FRD95 and FRD125/S auxiliary electric heating box.