CHUNLAN -B - Dismantling Sequence of Indoor Unit of FR(D)95 and FR(D)125;S

Exploded view & dismantling sequence of parts
- 21 -
3. Dismantling sequence of indoor unit of FR(D)95 and FR(D)125/S
(1) Remove 1;
(2) Remove 2;
(3) Remove 8, 4;
(4) Remove 14, 16;
(5) Remove 23;
(6) Remove 7;
(7) Remove 3;
(8) Remove 5;
(9) Remove 22
Annex: Dismantling sequence of typical parts
Indoor capacitor:
(1) Loosen tapping screws on retainer 26, rotate retainer 26;
(2) Remove right small hole cover plate assembly 10;
(3) Remove capacitor clip 20
Indoor motor:
(1) Loosen tapping screws on retainer 26, rotate retainer 26;
(2) Remove left and right small square hole cover plate assemblies 10 respectively;
(3) Remove left air intake 11, remove impeller 13;
(4) Remove plugs of motor 17 and capacitor 21 from control board;
(5) Remove connecting bolt between motor fixing block 19 and fan spiral casing 14;
(6) Remove motor.