© CIAS Elettronica S.r.l. Ed 1.1
Installation Manual Page 28 of 51 Sioux Pro 2
1 DESCRIPTION
1.1 System Description
SIOUX PRO 2 is a perimeter protection system for fences.
It comprises a central control board (Sioux-CU-Pro2), which can manage two lines of sensors (up
to 140 per line: 20 Master-Pro2 and 120 Slave-Pro2) that, when mounted on a perimeter fence,
are able to detect the disturbances caused by attempts to climb or cut the fence.
The Control Unit (CU) performs deep and sophisticated FUZZY LOGIC analysis of the electrical
signals generated by the sensors and allow discrimination between real intrusion attempts and
possible false alarms and can also identify the location of the damage or climbing.
The sensors located along the fence line detect the disturbances caused by an attempted
intrusion and convert them into electrical signals that are collected by each Master-Pro2 board.
Each Master-Pro2 board collect 7 electrical signals, convert them in digital format, assigns to
each one a proper address and then transmits these signals by an RS485 line to the Control Unit.
When the Control Unit analysis detects an attempt to climb or cut the fence, produces an alarm
event, stores it in a log file with the proper date/time and engineering values. The CU is then able
to transfer the alarm data in real time to other control systems to activate relays for alarm
indication.
The types of fences can be divided into the following categories:
➢ Woven wire mesh, welded, coated in plastic or galvanized
➢ Rigid metallic bars / thin grids
➢ Rigid metallic bars / thick grids
➢ Concertina or taut wire fences
➢ Gates
To Next Page
Loading...
