Need help?Do you have a question about the cias SIOUX PRO 2 and is the answer not in the manual?
Explains the Sioux PRO 2 as a perimeter protection system and its components.
Covers measuring perimeter and calculating required Sioux-CU-Pro2 units.
Provides an example for calculating sensors and cables for continuous fences.
Details calculating sensors and cables for fences with panels.
Guides sensor installation based on fence types like mesh, bars, concertina, and gates.
Explains how to install sensors in boxes and fix them to the fence.
Voltage step-up converter for the system.
Detects short circuits on power and data lines.
Module for redundancy at the end of branches.
Mounting the control unit in a cabinet.
Using software to configure zones and sensor characteristics.
Lists system components and their functions in maximum configuration.
Explains the function of the control unit.
Details manual configuration and alternative operations.
Explains automatic assignment of device numbers to Master-Pro2 boards.
Guides manual device number assignment for Master-Pro2 boards.
Procedure for configuring zones by hitting sensors.
Explains the Master-Pro2 board's communication and connectors.
Explains the Slave-Pro2 board's function and connection.
How to terminate each branch of the system.
Shows a typical system connection diagram.
Technical specifications for the Sioux Pro 2 system.
Technical specifications for the PoE version.
General| Technology | Microwave |
|---|---|
| Tamper Output | Yes |
| Protection Class | IP65 |
| Weight | 1.5 kg |
| Color | White |
| Power Supply | 12V DC |
| Alarm Output | Relay NO/NC |
To Next Page
