EN - 1 NA 06.130 C
CONTENTS PAGE
1 - INTRODUCTION 2
2 - RECEIPT OF THE UNIT 2
3 - WARRANTY 2
4 - SAFETY INSTRUCTIONS 2
5 - UNIT LOCATION 2
6 - HANDLING AND POSITIONING 3
7 - INSTALLATION 4
8 - VIBRATION ISOLATORS
(supplied as standard) 4
9 - FLOOR MOUNTING 5
10 - REFRIGERANT CONNECTIONS 6
11 - ELECTRICAL CONNECTIONS 6
12 - CONTROL 7
13 - CONTROL AND SAFETY DEVICES 7
13.1 Low pressure switch 7
13.2 High pressure switch 7
13.3 Internal compressor protection 7
14 - PRE-COMMISSIONING OPERATIONS 7
14.1 Pre-commissioning check 7
15 - COMMISSIONING 8
15.1 Start-up sequence 8
15.2 Check immediately 8
16 - LOCATION OF REFRIGERATING
CIRCUITS AND MAIN COMPONENTS 9
17 - TECHNICAL CHARACTERISTICS 10
18 - SETTING THE CONTROL AND SAFETY
DEVICES 11
19 - ELECTRICAL SPECIFICATIONS 11
20 - CONDENCIAT CD
OPERATING READINGS 12
21 - MAINTENANCE 12
22 - SERVICING 13
22.1 Safety instructions 13
22.2 Noise 13
22.3 Oil 13
22.4 Refrigerants - general information 13
22.5 Halocarbon and
hydrofluorocarbon refrigerants 13
22.6 Weekly checks 14
22.7 Monthly checks 14
22.8 Annual checks 14
23 - TROUBLESHOOTING OPERATING
PROBLEMS 14
23.1 Preliminary advice 14
24 - CUSTOMER CONNECTION OF
REMOTE CONTROL FUNCTIONS 15
24.1 General fault alarm 15
24. 2 Automatic operation control 16
25 - STAGE CONTROL 16
26 - FLUID ELECTRICAL VALVES 17
27 - CONNECTION PRECAUTIONS 17
28 - FAN WIRING 17
29 - ECODESIGN 18
Original text: French Version
To Next Page
Loading...
