To Next PageTo Next Page
Need help?Do you have a question about the Ciena 3930 Series and is the answer not in the manual?
General| Relative Humidity | 5% to 95% non-condensing |
|---|---|
| VLAN Support | 4094 VLANs |
| Storage Temperature | -40°C to +70°C (-40°F to +158°F) |
| Model | Ciena 3930 Service Delivery Switch, Ciena 3930x Service Delivery Switch |
| Mounting | Rack-mountable (1U) |
Legal text about document accuracy, changes, and limitations.
Specifies the target users for this manual and their required knowledge.
Lists other documents providing additional information about the product.
Notes Ciena's registered trademarks and product names.
Details the items included with the 3930 system upon receipt.
Lists necessary tools and materials for performing the installation.
Crucial warnings and precautions for safe system installation.
Describes options for installing the unit in walls or equipment frames.
Explains the grounding procedures and requirements for system safety.
Details the installation and types of power supply modules available.
Describes the pluggable optics used for network interface connectivity.
Provides best practices for installing network cables and ensuring proper connections.
Outlines the first steps for configuring the device after physical installation.
Instructions for accessing the system via serial console connection.
Procedure for setting up new user accounts for system access.
Steps to remove default or unwanted user accounts from the system.
Information on installing and managing software licenses for features.
Details on setting up the network interface for remote management.
Guide to connect to the system's command-line interface using Telnet.
Steps for configuring the direct management interface on the device.
How to use DHCP for automatic IP address configuration.
Procedure to assign a unique name to the system for identification.
Instructions for replacing power supply units in the system.
Explains the function of the reset button and associated LED indications.
Describes LEDs indicating the overall system operational status.
Details the LEDs on the power supply modules for status indication.
Explains the LEDs for the 10 Gigabit Ethernet ports.
Explains the LEDs for the 10/100/1000 Mbps Ethernet ports.
Describes the LEDs associated with the local management interface.
Explains the LEDs related to the synchronization (Sync) ports.
Details European standards and directives met by the unit.
Outlines compliance with US Federal Communications Commission rules.
Specifies compliance with Canadian radio interference regulations.
Declares compliance with Japanese voluntary control standards for emissions.
Guide for mounting the unit using wall brackets.
Instructions for rack mounting the unit using 19-inch brackets.
Instructions for rack mounting the unit using 23-inch brackets.
Procedure for generating system logs for troubleshooting purposes.
