EasyManua.ls Logo

Cillit Access 10 - Cillit Access 25; 25 Bio; 8 EC Declaration of Incorporation

Cillit Access 10
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
EN
22
EN
7.4 Cillit
®
Access 25 / 25 Bio*
Cillit
®
Access Unit 25 / 25 Bio
Nominal connection (outside thread) BSP ¾“ (DN 20)
Nominal  ow rate in accordance with EN 14743 l/h 1680
Operating pressure EU (min./max.) bar 1.0 / 8.0
Operating pressure UK (min./max.) bar 1.7 / 5.0
Pressure drop down at nominal  ow in accordance
with EN 14743
bar 1.0
Quantity of ion exchange resin l 25
Nominal capacity (EN 14743) / (CaCO3 mmol/l) m³x°dH/mol/ppm 75 / 13.4 / 1340
Capacity salt reservoir kg 24
Salt consumption per regeneration kg 3.0
Water consumption per regeneration l 145
Protection class IP 51
Water temperature (min./max.) °C 5 / 30
Ambient temperature (min./max.) °C 5 / 40
Electrical connection V / Hz 230 / 50
Dimensions: Width x depth x height (W x D2 x H) mm 270 x 480 x 804
Connection height (A) / over ow height (S) mm 675 / 540
Operating weight, approx. kg 70
*Tested with HiFlow connection available in option
EC declaration of incorporation *
)
BWT UK Ltd.
Coronation Road, BWT House
High Wycombe
Buckinghamshire, HP12, 3SUH
The company BWT UK Ltd. declares that the product domestic water softener
with the following speci cations:
Trade name of product Type of product Model
• Cillit
®
Access 10 / 10 BIO 10 litres
• Cillit
®
Access 15 / 15 BIO 15 litres
• Cillit
®
Access 20 / 20 BIO 20 litres
• Cillit
®
Access 25 / 25 BIO 25 litres
with a serial number higher than: 1105 000101
and with a production- and reference no.: see rating plate & technical speci cations
have been designed, manufactured and assembled according to the following
EC Directives (guidelines):
2006/95/EC
Guideline for low voltage (LVD)
2004/108/EC Guideline for electromagnetic compatibility (EMC)
Note: Do not perform any changes, extension and reconstruction work on the device which might impair
safety without the approval of BWT UK Ltd., otherwise this declaration loses its validity.
Note: Please ensure that all conditions of the installation preconditions are met!
Buckinghamshire, 30
th
May 2011
Ian Threadgill
General Manager (Supply Chain)
Manufacturer: BWT UK Ltd. – Coronation Road Buckinghamshire, HP12, 3SUH
*
)
Machinery Directive 2006/42/EC annex II, part II, part A, par. B
W
D
1
D
2
H
A
S
OPM - Cillit Access 10-25 vOrange - EN, DEv4.indd 22-23 02/10/2012 09:49