CIM MAXIMA 861 - Page 34

Manuale Istruzioni
Maxima 861
Maxima 861
Instruction Manual
Pag.
33
ERRORE
TROUBLE
MESSAGGIO
MESSAGE
E-12 ERROR IN TRACK 1 - PRESS START
E-13 ERROR IN TRACK 2 - PRESS START
E-14 ERROR IN TRACK 3 - PRESS START
E-15 ERROR ENCOD. COMMUNIC. - PRESS START
E-16 NO INPUT FROM ENCODER-PRESS START
E-17 NO INPUT FROM CARD - PRESS START
E-18 OUT OF INFILL RIBBON-REPLACE/START
E-19 TIPPER NOT READY - PLEASE WAIT
E-20 OUT OF TIPPER RIBBON-REPLACE/START
E-23 NO INPUT FROM TRACK 1 - PRESS START
E-24 NO INPUT FROM TRACK 2 - PRESS START
E-25 NO INPUT FROM TRACK 3 - PRESS START
E-27 PASSWORD DENIED - START TO CONTINUE
E-28 LOST SEMIPERMANENT DATA-PRESS START
E-29 DRUM DATA LOST - PRESS START
E-30 NO DRUM CONFIGURATION-PRESS START
E-35 UNLOAD FULL - PRESS START
E-36 CARD NOT UNLOADED - PRESS START
E-37 CARD LOST - PRESS START
E-38 CONFIG. LOST-PRESS START AND CHECK
E-39 NO CONFIG. -PRESS START AND CHECK
E-41 ERROR IN TRACK ACT2 - PRESS START
E-42 ERROR IN TRACK ACT3 - PRESS START
E-43 NO INPUT FROM TRACK ACT2 - START
E-44 NO INPUT FROM TRACK ACT3 - START
E-45 TIPPER MOTOR ERROR- PRESS START
E-46 Y TIPPER MOTOR - CHECK CARD/START
E-47 INF RIBBON ERR CHECK CARD/START
E-48 PRINTER NO CONNECTED
E-61 BCC ERROR - PRESS START OR FEED
E-62 PARITY ERROR - PRESS START OR FEED
E-63 NO FIELDS IN MASK - PRESS START/FEED
E-64 CODE ERROR - PRESS START OR FEED
E-65 FIELDS OVERFLOW - PRESS START
E-66 BAD FORMAT - PRESS START OR FEED